Acebeam H10 Headlamp (Black) CREE MT-G2
Acebeam H10 Headlamp (Black) CREE MT-G2
or make 4 interest-free payments of fortnightly with More info
CREE MT-G2 Q0(5000k) LED,one key max output max 2000lm, special design for outdoor and explorers,four output modes by rotating ring
Powered by one x 18650 (recommend high drain cell) or two CR123 batteries.
LED: Cree MT-G2 Q0 (5000K) with a lifespan of 50,000 hours
Max 2000 lumens output using 1*18650 battery(recommend high drain cell).
Level 1: 30 lms, 60hours; Level 2: 200lms, 4.5 hours;
Level 3: 500lms, 1.8hours; Level 4: 1000lms, 0.9 hours;
Power OFF: 15uA;
Working voltage: 3V to 6V
Max runtime: 30 hours
Max beam distance: 116 meters.
Peak beam intensity: 3400cd
Impact resistant: 1.2 meters.
Waterproof to IPX6 standard
Size:108mm(length)x24mm(head dia)x21mm(tube dia.)
Weight: 52g without battery.
Aircraft grade aluminum body structure.
Premium type III hard anodized anti-abrasive finish.
Ultra-clear tempered glass lens, with anti-reflective coating.
highly polished orange peel reflector creates max throw
Tactical knurling for firm grip.
Streamlined body design.
Intelligent highly efficient circuit board design for max performance and long run time;
Specially designed for military, Law Enforcement, Self-defense,Hunting ,Search & Rescue and Outdoor activities.
Intelligent temperature controlled light output for user safety
The H10 has 2 input devices; a 2-stage rubber click cap, and a rotating ring on the head of the flashlight.
Half press（1 stage gently press） the head cap for 2 seconds, the H10 is on, rotate the ring to select the 4 output modes;
Fully press（2 stage heavy press）and keep it pressed to activate the max 2000lm mode, loosen then off, regardless the light is on/off or under which output modes;
If the flashlight is stored or transmitted for a long time, please take out the batteries.
1. Use soft cloth to clean thread half a year and use silicone oil for lubrication.
2. Don’t use petroleum based lubricating oil on the waterproof O-ring, as the O-ring will be damaged.
3. In case of contact with corrosive liquid, clean it and dry it for use.
Detailed rules of product warranty:
In order to provide you with more satisfactory service and protect your rights and interests at the same time, please read the detailed rules carefully:
Introduction to detailed rules:
The detailed rules are applicable to the flashlight type and accessory product produced by Acebeam. The customers who buy Acebeam products through formal channels can enjoy the free warranty or limited warranty after-service provided by our company. In case of one of the following circumstances, free warranty service will not be provided:
1. The product failure or damage is caused by fall, or the product is repaired or changed without authorization.
2. The product failure or damage is caused by misuse or improper storage, safeguard, maintenance, or operation.
3. Flashlight damage is caused by battery leakage.
4. Other fault or damage caused by reasons irrelevant with Acebeam (including components) quality.
1.Free warranty period for 36 months: Within 36 months since the Acebeam flashlight is sold, under the condition that the customer use it according to specifications, if the product performance and operation problems arise, we will provide our customers with accessories and maintenance service for free. The transportation expenses shall be borne by customers.
2.Limited warranty for 10 years. After 36 months of free warranty period, Acebeam company will provide limited warranty for 10 years, and only charge the expenses for changing material. It will not charge any expenses of labor. The product maintenance and transportation expense shall be borne by customers. 3.In case of damage caused by customer's reasons, we will provide you with proper maintenance service, and only charge the expenses for changing material. We will not charge you any expenses of labor. But the customers shall bear postage and repair expenses themselves.